Envee II Baby High Chair with Playtable Conversion – Gray/Chevron

Write a review

Note: HTML is not translated!
    Bad           Good

Captcha

Envee II Baby High Chair with Playtable Conversion – Gray/Chevron

Badger Basket’s extended use Envee II Baby High Chair easily converts back and forth from a fully-featured baby feeding station to a separate play table and chair for your toddler and preschooler! The Envee II’s many, convenient features are easy to use, yet it’s also affordable. Includes a three-position adjustable front tray and three-position, adjustable, reclining seat. Seat can be reclined using one hand. Seat includes a five-point harness system with one-handed, quick release buckle. Simply press the large button in the center of the harness and both shoulder and waist belts release. All belts of the seat harness are fully adjustable for comfort at the shoulders, waist, and crotch. Shoulder belts can be released from the waist belts if needed when adjusting the harness or for removing the harness and pad for cleaning. Two feeding trays included! The large, regular tray has a removable, dishwasher-safe insert tray so it’s easy to tidy-up and always have a clean surface available for each meal. Translucent insert tray snaps off and removes easily by releasing and pulling up on the two side clips. The spacious insert tray includes two indented cup holders and a large indented main compartment (3/4 inch deep). The roomy main tray features one cup holder and one wide indented compartment (5/8 inch deep). Stylish seat pad is removable and washable. Quickly remove the chair from the table by pressing and releasing the large buttons and releasing the leg posts. Chair (with or without tray) can be used separately from the base/table. The chair connects to the table only one way for extra safety when converting it back to highchair use. As a play table, the chair nests fully under the table for comfort during craft or meal time, and compactness when not in use. Play table has an indented cup holder, crayon, and snack area. Includes four caps to cover the corner posts of the table when the chair is not connected. Lined and cushioned seat pad is 100% polyester fabric with 100% polyester fill. Chair and Table are made of durable, recyclable High-Density Polyethylene (HDPE) plastic; insert feeding tray is made of recyclable Polypropylene (PP). Overall Highchair with Tray measures 24.75 inches W (24 inches W when insert tray is removed) x 28.5 inches D with tray in 3rd position (30.5 inches deep with tray in 1st position) x 42 inches H. Overall Highchair without Tray measures 22.5 inches W x 25.5 inches D x 42 inches H. When Highchair seat is fully reclined, it adds another 2 inches to the Depth. Overall Highchair with Tray weighs 16.5 pounds (16.02 pounds with insert tray removed). Chair only with Tray measures 24.75 inches W (24.2 inches W when insert tray is removed) x 26.5 inches D x 24.5 inches H. Chair only without Tray measures 18.25 inches W x 21.75 inches D x 24.5 inches H. Chair only without Tray weighs 7.7 pounds. When Chair seat is fully reclined, it adds another 3.5 inches to the Depth. Interior width of the chair/seat is 12 inches W. Interior depth of the chair/seat bottom is 10.5 inches D from front to back. Interior height of the chair/seat back is 18 inches H. Distance from crotch belt to seat back is 7.5 inches. Maximum waist belts length is 23 inches. Height from top of seat to floor in Highchair position is 26 inches, and it is 9 inches from seat to floor in play chair position. Chair only without tray weighs 8 pounds. Table only measures 22.5 inches W x 25.5 inches D x 18.25 inches H (16.5 inches H to the tabletop surface). Table only weighs 6.5 pounds. Table surface area measures 18.5 inches W x 22.5 inches D at the widest points. Indented cup/snack area on the table measures 10.75 inches W x 4 inches D at the widest points (round cup holder only is 3.25 inches in diameter). Tray only with insert tray measures 24.75 inches W x 16 inches D (including the arms) x 6.5 inches H (including the safety T-bar). Tray without insert tray measures 24 inches W. Tray is 2 inches H not including the T-bar or position adjustment levers. Insert tray interior at the widest points measures 20.5 inches W x 8.5 inches D with 3/4 inch deep rim (cup holders are 2.75 inches in diameter). Main tray interior at the widest points measures 21 inches W x 8-5/8 inches D with 5/8 inch deep rim (cup holder is 2-7/8 inches in diameter). Tray only weighs 2.5 pounds. All measurements approximate and may be rounded. Measurements may vary slightly depending on position of the tray and recline of the seat. All measurements taken with the fabric seat pad in place. Pad can be machine washed in cold water, gentle cycle, do not bleach, do not iron, air dry. Pad may be dry cleaned if desired. Chair/table frame easily wipe clean with a sponge or damp cloth and mild soap. For use from approximately six months (when your child can sit unassisted) and up in the highchair. For use from approximately 2 years to approximately 6 years (40 pounds/18 kg) when converted to a play table and chair (maximum ages vary depending on the child’s size/weight and activity level). Complies with all current U.S. safety standards including T-bar on the tray to prevent sliding out. No polycarbonate plastic is used in the manufacturing of this chair, therefore the chair is BPA free. Adult assembly required. Illustrated assembly instructions included. Custom-designed assembly tool included. Product includes a limited warranty of 30 Days Parts to the original purchaser. Product details/features subject to change at any time without notice. Props/accessories shown are for illustration purposes only and are not included with the product. Actual color/finish may vary slightly from screen display. This item ships in its original carton which may include a product photo.

 

DIMENSIONS - 24.75 × 28.5 × 42 in

  • Brand: BAB
  • Product Code: 93702
  • Availability: In Stock
  • $122.99

Tags: Envee II Baby High Chair with Playtable Conversion – Gray/Chevron